yamutec® SER HYBRID 32_3A module for loads up to 3A

Item no.: 7436450

665,05 € Prices plus statutory VAT | plus shipping and handling
Delivery in 2-3 working days
= In stock

yamutec® SER HYBRID 32_3A module for loads up to 3A

Our yamutec® SER HYBRID 32_3A module is designed for high loads and can reliably switch load circuits with up to 3A. The SER modules are equipped with 32 optocoupler inputs and 32 relay outputs. This way you can capture signals safely and convert them directly into control commands.

The yamutec® SER hybrid module has 32 PCN series print relays for the outputs that can switch loads of 3A or 90W. We work with that MULTI CONNECTION SYSTEM, which guarantees 100 percent protection against mis-mating and is equipped with practical ejectors. You can also code the relays by cutting off the coding lugs.

For the 32 entrances of our yamutec® Modules we use optocouplers. These optoelectronic components enable galvanic isolation during signal acquisition. You can use the optocoupler inputs for a voltage range of 3V to 30V. All yamutec® hybrid modules were developed for industrial use and are therefore subject to the EMC and RoHS.

The advantages of the yamutec® SER HYBRID 32_3A module at a glance:

  • High switching capacities at the inputs are possible
  • Fast input pulses over a long period of time are not a problem
  • long service life of the optocouplers
  • insensitive to shock and vibration
  • low switching losses at the outputs
  • Short-term overloads are not a problem
  • reliable disconnection and switching

Are you looking for a hybrid module for smaller load circuits? Then just take a look at ours SER Hybrid 32 module.

Technical data

supply voltage External 7V to 24V DC (via two-pole pluggable screw terminal)
interface RS232 / V.24 / COM with up to 115,200 baud
Connection via 9 pin. D-Sub socket
control LEDs Internal 5V supply voltage
interface activity
Timout shutdown (only for outputs)
I/O activity
Error message
relay 32 relay outputs,
Normally open (NO)
Max. switching voltage: 48V AC / 48V DC
Max. switching current: 3A AC /3A DC
Max. transport current: 3A AC / 3A DC
Max. switching power: 90W
Galvanic isolation between contact and coil:
3kV RMS /1 min
Switching time: < 1 ms
Mechanical lifespan: up to 10 million switching cycles
Timeout function Selectable timeout protection when the module is unreachable, digital outputs can be enabled, disabled or left unchanged
optocoupler 32 optocoupler inputs
5V – 15V AC/DC signal voltage
15V – 30V AC/DC signal voltage (optional)
Galvanic isolation between input and output circuit: up to 2.5kV AC for 1 minute
Maximum input current: 10mA
Universal connection for all types of conductors
Locking the plug connection
Codeable and 100 % protected against mismating by cutting off the coding lugs
Connection data Solid conductor 0.08 … 1.5 mm² / 28 … 16 AWG
Fine-wire conductor 0.08 … 1.5 mm² / 28 … 16 AWG
Fine-wire conductor; with wire end sleeve with plastic collar 0.25 ... 1 mm²
Fine-wire conductor; with wire end sleeve without plastic collar 0.25 ... 1 mm²
Stripping length 6 … 7 mm / 0.24 … 0.28 inch
Recommended accessories

A strain relief plate that can be mounted in the middle between the conductor entries facilitates the plugging and unplugging process and allows easy access to the actuation openings even when wired

253mm x 105mm x 74.5mm (L x W x H)


Instructions German
sample software, C# and Python / Requirement: Windows 7/8/10 or Linux
without installation
About Yamutec®

Thanks to many years of experience in the field of hardware and software development for remote controls and remote monitoring, we stand for cost efficiency, reliability and environmental awareness.

Contact us

For offers and questions about our products, please contact us by phone at
+49 9131 930 73 50
or send us this Inquiry form.