General technical description
Our Yamutec® USB HYBRID32 module consists of 32 optocoupler inputs and 32 relay outputs. This allows you to safely capture and convert signals into control commands for the load circuit. These are the Yamutec® USB HYBRID32 modules ideal for automation, measurement and process technology.
The Yamutec® USB hybrid module has 32 reed relays of the SIP series for the outputs that can switch loads of 1A or 10W. This ensures 100 percent protection against incorrect plugging integrated MULTI CONNECTION SYSTEM with ejectors. It can also be used to code the relays by cutting off the coding lugs.
At the 32 entrances of the Optocouplers were installed in the hybrid module. The semiconductors create galvanic isolation when capturing signals, which additionally protects your IT system. The optocoupler inputs work in a voltage range of 3V to 30V. Our hybrid modules are designed for industrial use for control and regulation and therefore take the EMC and RoHS been developed.
Your advantages with the Yamutec® USB optocoupler module
The 8 optocoupler inputs of our USB module have important properties for signal acquisition. This is how it is possible high switching performance and to reliably record fast input pulses. Since there is no mechanical wear, opto inputs have a long service life. In addition, due to their insensitivity to shock and vibration, they ensure fewer failures in the control and regulation circuit.
Our 16 relay outputs impress with their low switching losses and reliable separation of the control and load circuits. In addition, the relays are insensitive to electromagnetic interference fields and can withstand short-term overloads very well.
Further functions and properties of the hybrid module
To use several identical Yamutec® USB HYBRID32 modules, an identification number can be configured for each module using the on-board coding switches. This means clear communication is also possible with several or up to 8 hybrid modules.
You can mount the module on the wall or on a top-hat rail using its devices. Built-in control LEDs allow activities and statuses to be read at any time.
A timeout protection function for the reed relays can be activated using a software command. If a communication problem occurs with the control PC, the timeout automatically opens the outputs. The time period can be set when activating.
Thanks to the Human Interface Device (HID) process, our Yamutec® USB HYBRID32 modules no driver installation for commissioning. In addition, communication is more reliable and faster compared to standard modules. With the help of Plug and play technology save Time, since the time-consuming driver installation is no longer necessary.
The USB-HYBRID32 modules from Yamutec® enable seamless integration into various widely used programming languages using the included YMLib.dll file. This DLL file opens up a variety of possibilities and makes programming much easier.
|External 7V to 24V DC via pluggable screw terminal or via USB. Setting via jumper.
|5V supply voltage
Timout shutdown (only for outputs)
|32 relay outputs,
Galvanically isolated via relays
Max. switching voltage: 30V AC / 30V DC
Max. switching current: 0.5A AC / 0.5A DC
Max. transport current: 1A AC / 1A DC
Max. switching power: 10W
Switching time: < 1 ms
|32 optocoupler inputs
3V – 30V AC/DC signal voltage
Isolation voltage: 2.5KV AC for 1 minute
Maximum input current: 10mA
|2 ROW MULTI CONNECTION SYSTEM
Universal connection for all types of conductors
Locking the plug connection
Codeable and 100 % protected against mismating by cutting off the coding lugs
|Solid conductor 0.08 … 1.5 mm² / 28 … 16 AWG
Fine-wire conductor 0.08 … 1.5 mm² / 28 … 16 AWG
Fine-wire conductor; with wire end sleeve with plastic collar 0.25 ... 1 mm²
Fine-wire conductor; with wire end sleeve without plastic collar 0.25 ... 1 mm²
Stripping length 6 … 7 mm / 0.24 … 0.28 inch
|253mm x 105mm x 74.5mm (L x W x H)
|Source code examples
|VB6, VB.NET, C#, .NET6, LabVIEW and Python
|Source code manual
for Linux & Windows
|API developer tool
|YMLib.dll (64-bit | 32-bit | x86) library file for Windows
|API reference guide
|YMLIB API References USB
|Supported operating system
scope of delivery
|USB HYBRID32 module
|CD with product description, manuals, data sheet & source code examples
A plug to B plug
(Item no.: 1510541)
MW HDR-60-15 DIN rail mounting single output 1-phase power: 60W, 15V, 4A can be mounted directly on the DIN rail
27,00 € Prices plus statutory. VAT
plus shipping and handling
Availability: Out of stock!
Delivery approx. in 1-2 weeks
Strain relief plate
for 16-pin WAGO connectors
(Item no.: 2703800)
A strain relief plate that can be mounted in the middle between the conductor entries facilitates the plugging and unplugging process and allows easy access to the actuation openings even when wired
0,50 € Prices plus statutory. VAT
plus shipping and handling
Availability: In stock!
Delivery in 2-3 working days